Philips DVD750VR Mode D'emploi page 11

H9421CD/DVD750(EN).pgs1-51.QX3 03.4.11 11:29 AM Page 11
This connection will let you use the features of both the VCR and the DVD Player.
Antenna or Cable TV
1
Signal to ANT-IN Jack
DVD/VCR VCR
AUDIO OUT AUDIO IN
ANT-IN
L
R
ANT-OUT VIDEO OUT VIDEO IN
1
Connect the antenna or Cable TV signal to the ANT -IN (Antenna In)
jack of your DVD/VCR.
2
Connect the red and white audio cables (supplied) to the red and
white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red
and white AUDIO IN jacks on the TV. Match the cable colors to the jack
colors. If the TV has a single AUDIO IN jack, use the white audio cable to
connect the DVD/VCR's white DVD/VCR AUDIO OUT (left) jack to the TV's
AUDIO IN jack.You will not use the red cable. Or, purchase a "splitter" audio
cable to go from the left/right AUDIO OUT jacks of the DVD/VCR to the TV's
single AUDIO IN jack.
3
Connect the yellow video cable (supplied) to the DVD/VCR VIDEO
OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.
The VIDEO IN jack on the TV is usually yellow and may be labelled CVBS,
Composite, or Baseband video.
4
Connect the power cords of the TV and the DVD/VCR to a power
outlet.Turn on the TV and set it to the correct Audio/Video In chan-
nel. Go to your lowest TV channel (01 or 02), then change channels down-
ward until you see VCR or DVD playback on the TV screen.
To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press
DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD
Video logo will appear on the TV screen when you get the TV on the correct
Audio/Video In channel.
5
You are ready to turn on the DVD/VCR. Go to page 17 to complete
the first-time setup.
DVD/VCR to a TV that has Audio and Video In jacks
Using the supplied red, white, and yellow cables
L
R
PROGRESSIVE
I
2
Audio Cables
3
Video Cable
Hookups (cont'd) 11
DVD
S-VIDEO COMPONENT AUDIO DIGITAL
OUT VIDEO OUT OUT AUDIO OUT
Y
P b /
L
C b
COAXIAL
P r /
P
R
C r
Audio and
Video IN Jacks
on TV