Malfunctions And Troubleshooting - Boneco H300 Manuel

50

MALFUNCTIONS AND TROUBLESHOOTING

en
Problem
Air has an unpleasant odor
No improvement in air quality
AUTO LED on the appliance flashes red
Appliance cannot be operated in the app.
The message "Searching ..." "Non accessi-
ble" appears
AUTO LED pulses
Current display flashes if handling is
attempted
Display remains dark
Possible cause
Stagnant water in the water base
Open windows or doors
The water base is empty
Appliance is blocked by another smartphone
The desired humidity has been reached or exceeded
Operation is blocked
The brightness of the LEDs has been heavily reduced
in the app
Action
Drain the water base and clean the appliance and the
AW200 evaporator mat
Close windows and doors
Fill the water base
Close the app on the second smartphone
None needed
Disable the LOCK function in the app
Increase the brightness of the LEDs in the app