Cleaning The Pre-Filter; About The Pre-Filter; Clean The Pre-Filter - Boneco H300 Manuel

Masquer les pouces Voir aussi pour H300:

Table des Matières

Les langues disponibles

CLEANING THE PRE-FILTER

The pre-filter cleans coarse contaminants from the

air. Clean the pre-filter if it is dusty or dirty.

1. Press down each of the four corners of the cover

in sequence to unlock it.

2. Remove the pre-filter by pulling it upwards by

the lug in its center.

3. Wash the pre-filter under running water using a

cleaning brush.

4. Dry the pre-filter with a cloth.

5. Insert the pre-filter into the appliance.

6. Attach the cover.

Table des Matières