Troubleshooting - Ghibli & Wirbel SB 133 Utilisation Et Entretien

PROBLEM
Although the lever release
button and brush rotation le-
vers are pressed at the same
time, the machine does not
start.
The brush and/or pad holder
do not rotate.
No water is released
Insufficient floor cleaning.
Insufficient floor polishing/
sanding.
The machine operates errati-
cally or vibrates heavily.

TROUBLESHOOTING

CAUSE
The appliance is unplugged.
The brush/pad holder rota-
tion lever is not pressed.
Presence of foreign bodies.
The tank is empty.
Water supply
pressed.
Unsuitable brushes or
detergent.
Insufficient detergent
solution.
Worn brush.
Pad worn.
Check that the brush or pad
holder are assembled cor-
rectly.
Check that the pad is per-
fectly centred in the pad
holder.
The brush or pad holder are
not suitable for the floor.
ENGLISH - 10
Professional Cleaning Machines Since 1968
SOLUTION
Plug the appliance in.
Press the lever.
Remove any foreign bodies
stuck in the appliance.
Fill the tank.
lever not Press the lever.
Use brushes or detergents
that are suitable for the type
of floor or dirt to be cleaned.
Fill the tank (optional) with
detergent solution.
Replace the brush.
Replace the pad.
Replace the brush or pad
holder correctly.
Replace the pad, centring it
correctly in the pad holder.
Use a brush or pad holder
that is suitable for the type of
surface and/or processing to
be performed.
www.ghibliwirbel.com