Networking The Pdu; Features - Tripp-Lite PDUMH15AT Manuel Du Propriétaire

2. Installation
2.2E Connect Equipment to PDU: Do not exceed the load rating of the PDU. The total
electrical current used by the PDU will be displayed on the digital meter in amperes. Each outlet
includes a green LED that illuminates when the outlet is receiving AC power.
2.2E

2.3 Networking the PDU

For network configuration instructions, please refer to the WEBCARDLX owner's manual (PN
93358E) included with this product.

3. Features

16-11-164-933689.indb 5
(continued)
PDUMH15AT
PDUMH20AT
Primary AC Input Power Cord (Model
PDUMH15AT/15ATNET):The cord is permanently attached to the
PDU and has a NEMA 5-15P plug.
Primary AC Input Power Cord (Model PDUMH20AT/20ATNET):
The cord is permanently attached to the PDU and has a NEMA
L5-20P plug.
Secondary AC Input Power Inlet (Model
PDUMH15AT/15ATNET): The IEC-320-C14 inlet connects to the
detachable Secondary AC Input Power Cord.
Secondary AC Input Power Inlet (Model
PDUMH20AT/20ATNET): The IEC-320-C20 inlet connects to the
detachable Secondary AC Input Power Cord.
5
PDUMH15ATNET
PDUMH20ATNET
1/4/2017 2:18:49 PM