Installation; Mounting The Pdu - Tripp-Lite PDU15NETLX Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation

Mounting the PDU

The PDU supports three primary mounting configurations: 0U Rack (Vertical), Wall and
Under-Counter.
Note: Regardless of configuration, the user must determine the fitness of hardware and procedures before
mounting. The PDU and included hardware are designed for common rack and rack enclosure types and may
not be appropriate for all applications. Exact mounting configurations may vary. Screws for attaching the
mounting brackets are included. Use only the screws supplied by the manufacturer or their exact equivalent
(#6-32, 3/16" flat head).
1-1
0U Rack Mounting: Use 2 screws
to attach each of the 2
A
mounting brackets
Mount the PDU vertically by
inserting 2 or more user-supplied
screws
C
brackets
points in the rack or rack
enclosure.
1-2
Wall Mounting: Use 2 screws
to attach each of the 2 mounting
brackets
the PDU to the wall by inserting 2
or more user-supplied screws
through the mounting brackets
and into secure mounting points.
1-3
Under-Counter Mounting: Use 2
screws
A
mounting brackets
Mount the PDU under the counter
by inserting 2 or more user-
supplied screws
mounting brackets
secure mounting points.
17-02-373-9336CA.indb 3
to the PDU.
B
through the mounting
and into mounting
B
to the PDU. Mount
B
C
to attach each of the 2
to the PDU.
B
through the
C
and into
B
B
1-1
A
B
B
1-2
A
1-3
3
C
A
C
C
A
C
A
B
C
6/2/2017 2:08:38 PM

Publicité

Table des Matières
loading

Table des Matières