Hdmi Color Format; Hdmi Deep Color; Still Mode; Progressive Mode - Samsung HT-D5500K Manuel D'utilisation

Setup
✎
NOTE
If the TV you connected to the product does
not support Movie Frame or the resolution you
selected, the message "If no pictures are
shown after the selection, please wait for 15
seconds. And then, the resolution will be
reverted to the previous value automatically.
Would you like to make a selection?" appears.
If you select Yes, the TV's screen will go blank
for 15 seconds, and then the resolution will
revert to the previous resolution automatically.
If the screen stays blank after you have
changed the resolution, remove all discs, and
then press and hold the STOP (@) button on
the front of the product for more than 5
seconds. All settings are restored to the
factory default. Follow the steps on the
previous page to access each mode and
select the Display Setup that your TV will
support.
When the factory default settings are restored,
all stored user BD data is deleted.
The Blu-ray Disc must have the 24 frame
feature for the product to use the Movie Frame
(24Fs) mode.
If both HDMI and Component jacks are
connected and you are currently viewing
Component output, the resolution is fixed to
480i.

HDMI Color Format

Lets you set the Color space format for HDMI
output to match the capabilities of the connected
device (TV, monitor, etc).
• auto : Automatically sets the product to the
optimum format supported by your device.
yCbCr (4:4:4) : If your TV supports the YCbCr
•
Color space via HDMI, select this to output the
normal YCbCr Color gamut.
rGB (Standard) : Select RGB (Standard) to
•
output the normal RGB Color gamut.
• rGB (enhanced) : If you have connected the
product to a DVI display device such as a
monitor, select RGB (Enhanced) to output the
enhanced RGB Color gamut.

English
Movie Frame (24 Fs)
Setting the Movie Frame (24Fs) feature to Auto
allows you to adjust the product's HDMI output to
24 frames per second for improved picture quality.
You can enjoy the Movie Frame (24Fs) feature only
on a TV supporting this frame rate. You can select
Movie Frame only when the product is in the HDMI
1080i or 1080p output resolution modes.
auto : Movie Frame (24Fs) functions work.
•
Off : Movie Frame (24Fs) functions are off.
•

HDMI Deep Color

Lets you output video from the HDMI OUT jack
with Deep Color. Deep Color provides more
accurate Color reproduction with greater Color
depth.
• auto: The product outputs video with Deep
Color to a connected TV which supports HDMI
Deep Color.
Off : The picture is output without Deep Color.
•

Still Mode

Lets you set the type of picture the product
displays when you pause DVD playback.
auto: Automatically shows the best still picture
•
depending on the content.
Frame : Select when pausing a scene with a
•
little action.
field : Select when pausing a scene with a lot
•
of action.

Progressive Mode

Lets you improve picture quality when viewing DVDs.
• Auto : Select to have the product automatically
select the best picture quality for the DVD
you're watching.
• Video : Select for the best picture quality from
concert or TV show DVDs.