Network Status; Bd-Live Internet Connection - Samsung HT-D5500K Manuel D'utilisation

Setup
WPS(PBC)
The easiest way to set up the wireless network
connection is using the WPS(PBC) function or the
One Foot Connection function.
If your wireless router has a WPS(PBC) button,
follow these steps:
1.
Press the ▲▼ buttons to select WPS(PBC).
Settings Settings
Network Settings
Display Display
Select a network connection type.
Audio Audio
Network Network
Wired
System System
Wireless
Language Language (general)
Connect to the Wireless Router easily by pressing the
Security Security
WPS(PBC)
WPS(PBC) button. Choose this if your Wireless Router
supports Push Button Confi guration(PBC).
General General
One Foot
Connection
Support Support
> Move " Enter ' Return
2. Press the ENTER button.
3. Press the WPS(PBC) button on your router
within two minutes. Your product displays
the Network Selection Screen, and
automatically acquires all the network
settings values it needs and connects to your
network. When it is done, it displays an OK
button. Press the ENTER button on your
remote.
One Foot Connection
You can set up the wireless connection
automatically if you have a Samsung Wireless
Router which supports One Foot Connection. To
connect using the One Foot Connection function,
follow these steps:
1. Press the ▲▼ buttons to select One Foot
Connection.
Settings Settings
Network Settings
Display Display
Select a network connection type.
Audio Audio
Network Network
Wired
System System
Wireless
Language Language
(general)
Connect to your wireless network automatically if your
Security Security
WPS(PBC)
Wireless Router supports One Foot Connection. Select
this connection type after placing the Wireless Router
General General
One Foot
within 10 inches(25cm) of product.
Connection
Support Support
> Move " Enter ' Return

English
2. Press the ENTER button.
3. Place the Samsung Wireless Router within
25 cm (10 inches) of your product to
connect.
4. Wait until the connection is automatically
established.

Network Status

Check whether a connection to the network and
the Internet have been established.
Settings Settings
Network Status
Display Display
MAC Address
Audio Audio
IP Address
Subnet Mask
Network Network
KT_WLAN
Gateway
DNS Server
System System
Language Language Cannot connect to the Wireless Router. Try the following.
- Ensure the Wireless Router is powered on and try re-setting the power of the
Security Security Wireless Router.
- Check the security key if the Wireless Router has a security key.
General General
Support Support
Network Settings IP Settings
< Move " Enter ' Return

BD-LIVE Internet Connection

Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
Allow (All) : The Internet connection is allowed
•
for all BD-LIVE contents.
Allow (Valid Only) : The Internet connection is
•
allowed only for BD-LIVE contents containing a
valid certifi cate.
Prohibit : No Internet connection is allowed for
•
any BD-LIVE content.
✎
NOTE
What is a valid certifi cate?
When the product uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certifi cate back to the product.
The Internet connection may be restricted
while you are using BD-LIVE contents.
XX:XX:XX:XX:XX:XX
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Retry OK