Playing Music - Samsung HT-D5500K Manuel D'utilisation

Basic Functions

Playing Music

My Contents
Videos
Connected Device
Photos
iPod
Music
My Devices
Function
" Enter ' Return
1. Connect the iPod dock connector to the iPod
Jack on the rear panel of the product.
2.
Place the iPod in the supplied iPod Dock.
Your iPod automatically turns on.
•
The "iPod" message appears on the TV
•
screen.
3. Press the ENTER button.
4. Press the ◄▲▼ buttons to select Music,
and then press the ENTER button.
5.
Select the music fi le to play.
- You can use the remote control or product
to control simple playback functions such
as the PLAY, PAUSE, STOP, [/ ], (/
) and REPEAT buttons. See page 16.
✎
NOTE
Adjust the volume to a moderate level before
you connect your iPod to the product.
When the product is on and you connect an
iPod, the product will charge the iPod's
battery.
Make sure to connect the dock connector
so that the label "" faces upward.
Watching a Movie
You can play video fi les stored in the iPod player
by connecting it to the product.
1. Connect the iPod dock connector to the iPod
Jack on the rear panel of the product.
2. In the iPod screen, move to Videos >
Settings, then set the TV Out option and the
TV signal.
3.
Place the iPod in the supplied iPod Dock.
The "iPod" message appears on the TV
•
screen.
4. Press the ENTER button.
5. Press the ◄▲▼ buttons to select Video, and
then press the ENTER button.

English
6. Select the video fi le to play.
- You can use the remote control or the
✎
NOTE
Internet Settings
d WPS(PBC)
use an iPod/iPhone with a Wireless Dock
Cradle (sold separately) for iPod/iPhone
You can enjoy fi ner quality music through the
speakers by transmitting an iPod/iPhone's audio
signal using a Wireless Transmitter.
To connect the Cradle to the main unit when you
use the Cradle the fi rst time, you have to set the
Linking ID manually. (see page 62)
After you set the Linking ID, the Cradle will
connect to the Wireless Transmitter automtically
when you turn it on.
To use the Wireless Dock Cradle:
Turn on the main unit and connect the iPod/
iPhone to the Wireless transmitter.
Then, press the
select "W. IPOD" mode.
The FUNCTION mode of the main unit switches
as follows : BD/DVD ; D. IN ; AUX ; R. IPOD ;
W. IPOD ; H. IN1 ; H. IN2 ; FM ( See page 14)
product to control simple playback functions
such as the PLAY, PAUSE, STOP, [ /]
and( /)buttons. (See page 16)
You must have the VIDEO output
(Composite) connected to your TV to view
iPod video (See page 25).
If you want to play iPod video via VIDEO
output, set Anynet+ (HDMI-CEC) to off.
No other screen than the playback screen
will appear on the TV. View other iPod
screens on the iPod player.
If the connected iPod does not support
video playback, the "Playing video fi les is not
supported on this iPod model." message
appears when you select the Video menu.
If you want to return to the iPod menus while
the iPod player is connected using the dock,
press FUNCTION on the remote control or
press on the front panel of the system and
select R. IPOD. The FUNCTION mode
switches as follows : BD/DVD ; D. IN ; AUX ;
R. IPOD ; W. IPOD ; H. IN1 ; H. IN2 ; FM
button on the product to