Speaker Settings - Samsung HT-D5500K Manuel D'utilisation

audio

Speaker Settings

Settings Settings
Speaker Settings
Display
Audio
Level |
Network Network
Distance
System
Test Tone : Off
Language Language
Security
General
Support
> Move " Enter ' Return
Level
You can adjust the balance and level for each
speaker.
Adjusting Front /Center/Surround/Subwoofer
Speaker Level
• You can adjust the volume level in steps from
+6dB to -6dB.
• The sound gets louder as you move closer to
+6dB and quieter as you get closer to -6dB.
Settings Settings
Level
Display
Audio
Front L 0 dB |
◄
Network Network
Front R : 0 dB
System
Center : 0 dB
Surround L : 0 dB
Language Language
Surround R : 0 dB
Security
Subwoofer : 0 dB
General
Test Tone : Off
Support
> Move < Change ' Return
Distance
If you cannot place the speakers at equal
distances from the listening position, you can
adjust the delay time of the audio signals from the
front, Center, surround and subwoofer speakers.
• You can set the Speaker Distance between
1ft (0.3m) and 30ft (9.2m).
Settings Settings
Distance
Display
Audio
Front L 10(ft) 3.0(m)
|
◄
Network Network
Front R : 10(ft) 3.0(m)
System
Center : 10(ft) 3.0(m)
Surround L : 10(ft) 3.0(m)
Language Language
Surround R : 10(ft) 3.0(m)
Security
Subwoofer : 10(ft) 3.0(m)
General
Test Tone : Off
Support
> Move < Change ' Return
Test Tone
Use the Test Tone feature to check the speaker
connections.
Press the _, + buttons to select ON.
A test tone will be sent to Front L ; Center ;
•
Front R ; Surround R ; Surround L ;
Subwoofer in order so you can make sure the
speakers are set up correctly.
To stop the test tone, press the _, + buttons to
select Off.
Settings Settings
Speaker Settings
Display
Audio
Level
Network Network
Distance
System
Test Tone On
|
◄
Language Language
Security
General
Support
> Move " Enter ' Return
✎
NOTE
When HDMI Audio is ON (audio is produced
through TV speakers), the Test Tone
function is not available.

English