Electrical Installation; Important Notes; Connection Plan - Lenze Global Drive EZN3-0022H150 Serie Instructions De Montage

4

Electrical installation

Important notes

4 Electrical installation
4.1 Important notes
Installation must
ƒ
– always be in accordance with the operating conditions specified in the Technical
data (¶ 32).
– be carried out to EN 60204−1.
Please observe the following when selecting the cable type:
ƒ
– The cables used must comply with the approvals required for the application (e. g.
VDE, UL etc.).
– Fuses and cable cross−sections must be dimensioned in accordance with the
specifications in the documentation for the basic device.
– Normally, twisted cables are sufficient to wire the thermal contact. In rare cases,
the evaluation of temperature may be faulty. In this case, we recommend to use
shielded cables, to mount the shield sheet of the accessory kit, and to attach the
cable shield to the shield sheet.
4.2

Connection plan

K1
L1
L2
L3
N
PE
40
1
T1 T2 PE L1 L2 L3
Line
J >
Load
EZN...
PE L1' L2' L3'
PE
L1 L2 L3
0
0
Controller
1
Connection of the thermal contact
l
F
EZN3x003
EDKZNXXXX−001 DE/EN/FR 3.0