Electrical Installation; Connection Plan - Lenze ERB R W Série Instructions De Montage

4

Electrical installation

Important notes
4 Electrical installation
Important notes
(
Stop!
No protection from overload
An overload of the brake resistor during operation
cannot be excluded.
Possible consequences:
The brake resistor overheats and will be
ƒ
damaged.
The drive will not be decelerated but coasts.
ƒ
Protective measures:
The thermal contact of the brake resistor must
ƒ
always be connected.
Implement the thermal contact into the system
ƒ
monitoring so that the mains supply of the
standard device will be switched off in case the
brake resistor will be overheated (e.g. switch off
mains contactor control).

Connection plan

Variant 1: without cable extension
R
B
Twisted cables
Length of prepared cables ^ 23
f
24
PE
l
ERBMXXX012
EDKRBM390R DE/EN/FR/ES/IT 2.0