Krups EA90 Serie Mode D'emploi page 229

KRUPS
SERIE EA90
n
Fill the cup with the volume of milk indicated on the screen and
place it under the coffee spouts.
n
The cup must be placed close to the cleaning container, under the steam
nozzle, at the back of the niche.
n
However, do not press the cleaning container (11) with the cup; otherwise,
it might break off.
3
n
You can lower or raise the coffee nozzle to suit the size of your cup. The
steam nozzle will descend just behind the coffee nozzles. Caution: the
maximum height of the cup is defined by the coffee nozzles; do not tilt the
cup to place it under the coffee nozzles.
n
To use a large cup (or mug), you might have to remove the small drip tray (6).
n
Press the "OK" button.
n
Milk preheating phase.
n
Milk frothing phase:
the milk is then frothed
according to the chosen recipe.
4
n
The nozzle moves up and draws back to return to its cleaning
container.
n
Remove the cup when the screen shows: Your milk is ready.
n
Rinsing the nozzle.
5
n
The nozzle is rinsed automatically. You must wait for this rinsing to be
complete before starting the next preparation.
n
Hot water
n
Press the "Hot water" button on the touch screen.
n
If the machine detects no water when you request this recipe, it will ask
you to fill the tank.
1
28