Krups EA90 Serie Mode D'emploi page 223

KRUPS
SERIE EA90
4.2 Preparing coffee-based drinks with coffee beans
n
This section explains how to operate the machine using its features, taking the example of espresso
and cappuccino.
n
Espresso
n
Press the "Espresso" button on the touch screen.
n
If the machine detects no beans when you request this recipe, it will ask
you to fill the bean container (see section 2.3).
n
1
If the machine detects no water when you request this recipe, it will ask
you to fill the tank.
n
Place the cup(s) under the coffee nozzles.
n
You can lower or raise the coffee nozzle to suit the size of your cup(s).
n
Possible settings
n
You can prepare one or two cups with your appliance.
n
Choosing the strength: The more beans you select, the stronger the
preparation will be. You can modify the strength using the arrows on the
2
left and right of the symbols (except in the case of double espressos).
n
Choosing the volume: The screen displays the last volume setting
associated with espresso. You can modify this volume using the arrows
on the left and right of the indicated value
n
Press the "Start" button on the touch screen to start the preparation.
n
Preparing an espresso
n
The machine starts preheating, if required, and then grinds the beans,
tamps the ground coffee and finally brews the coffee.
n
You can adjust the coffee volume during the cycle using the up and down
3
arrows.
n
You can stop the preparation by pressing the "Stop" symbol or the On/Off
button (1) or the ground coffee button (2).
n
Remove the cup when the screen shows: Your espresso is ready.
22
.