Krups EA90 Serie Mode D'emploi page 245

KRUPS
SERIE EA90
n
Place a recipient with a capacity of at least 0.6 litres under the
coffee nozzles and press OK.
n
The descaling phase will start.
3
n
When the descaling is complete: Empty your recipient and put it
back, then empty the water tank, rinse it well and fill it again.
n
The first rinsing will start.
4
n
End of the first rinsing: Empty your recipient and replace it.
5
n
End of the second rinsing and of the steam circuit descaling phase.
n
The nozzle returns to its cleaning container.
6
n
Refit the Claris Aqua Filter System filter, if necessary.
n
Empty your recipient and fill the water tank.
!
Caution:
During the descaling or coffee circuit cleaning programmes, water can splash quite strongly.
If required, place a paper towel on the drip tray.
44