Krups EA90 Serie Mode D'emploi page 238

n
You can access the "Maintenance" menu from the main menu
by pressing the "Maintenance" tab.
n
To clean the nozzle and its container, you must follow the sequence
shown in the Maintenance tab.
1
n
Failure to follow this sequence may damage the system.
n
Press the "Manual cleaning of the nozzle" button on the touch screen.
n
To quit the "Maintenance" menu, press the "Maintenance" tab.
n
The nozzle comes out of the cleaning container.
n
You can clean all of the parts of the machine located behind the coffee
nozzle.
2
n
Remove the drip tray.
n
Empty it and clean it.
3
n
The nozzle moves forward and slightly downward.
n
Unscrew the nozzle tip (10) with the steam nozzle (9).
n
Do not remove the tip seals, as this may damage them and affect the
frothing performance.
4
!
Caution:
Risk of scalding while unscrewing; the temperature of the nozzle can be high (> 50°C).
n
Clean the three holes on the nozzle tip using the pin supplied for this
purpose with the Welcome Pack. You must fully separate the two
parts to clean them properly.
n
Do not wash the tip in the dishwasher.
n
5
Caution: clean the tip properly.
n
Press the "OK" button.
ENGLISH
37