Dosage Of Ground Coffee; Recommendations - Saeco ROYAL DIGITAL SUP 015 Instructions D'emploi Et D'entretien

34
The keys allow you to change the set
options: on, off, long (in this case the pump
stops for a longer period).
Selecting the pregrinding
function
By selecting the pre-grinding function, the ma-
chine grinds coffee every time the doser is
empty. So, a ground coffee portion is always
ready in the doser. This allows time saving in the
semi-professional domain.
Move the asterisk at the end of the line to the
menu item <<pre-grinding>> using the keys
. Press ENT to activate this function.
The display shows:
6 PREGRINDING
OFF
The keys allow you to change the set
options: on, off.
Total coffee
Move the asterisk at the end of the line to the
menu item << total coffees>> using the keys
. Press ENT to activate the option.
The display shows:
7 TOTAL COFFEE
and the total number of coffees dispensed by
the machine.
This figure cannot be changed.
To leave this menu, press ENT or ESC.
Descaling
Move the asterisk at the end of the line to the
menu item <<descaling>> using the keys
Press ENT to activate the item.
The display shows:
8 DESCALING
On descaling see page 40.

DOSAGE OF GROUND COFFEE

In programming function, by pressing keys,
move the asterisk till the end of the line on the
menu Sign. Descal. and confirm the selection
with ENT button.
The following message will be displayed:
RESET DECSALING
NO
By means of the same keys, it is possible to
modify the value; Yes, or no.
If the function
SIGN. DESCAL.
is selected without the display message
Descale, the following message will be
displayed:
QUANTITY WATER
To enter the programming mode, press the
Key ENT.
Timer
The timer enables the automatic switching off of
the machine after a preset period, which can be
set from 15 minutes to 12 hours after last
dispensing.
If after a few seconds coffee is brewed again,
the timer is reset. If the value set is 0:00, the
timer function is not activated and the machine
does not switch off.
Move the asterisk at the end of the line to the
menu item <<timer>> by means of the
keys . Press ENT to activate this item.
The display shows:
STANDBY
AFTER 0:00
The keys allow you to set the time peri-
ods. Save by means of the ENT key.
. If the set time has already passed, the display
shows:
ENERGY
SAVING
and the machine switches off. If necessary, you
can switch on the machine again by means of
the energy saving switch.
35
Rinsing cycle
This appliance is equipped with a rinsing
cycle program for the usual, daily and
weekly rinsing. If regularly used, this pro-
gram effectively eliminates the greasiness of
coffee in inaccessible parts and avoids
alterations in the taste of coffee.
Depending on the way the appliance is
used, it is advisable to rinse it every month
or after max. 250 cups of coffee. The
rinsing cycle lasts about 5 minutes, and it is
divided into 4 cycles, including the rinsing
with cold water. Each cycle is followed by
a short pause of about 40 seconds.
Never stop the rinsing cycle.
Important: before starting the rinsing
cycle, always fill completely the water tank
and put a capacious container (min. 1 litre)
under the coffee dispensing unit, which is
height-adjustable and can be removed for
cleaning.
The rinsing cycle needs about 1 litre of
water (including final rinsing). From time to
time, empty the water tank.
By using the keys move the asterisk to
the menu item <<RINSING CYCLE>>. To
enable this menu item use the ENT key.
The following message appears on the
display:
RINSING CYCLE
This function starts the rinsing cycle with
water of those parts concerned with the
coffee dispensing. When the rinsing cycle
ends, the following message appears on
the display:
SELECT
READY FOR USE
Dosage of ground coffee
28 The coffe dosage adjustment lever (18)
allows the selection of the coffee quantity, from
6 to 9 grams.

RECOMMENDATIONS

Place the adjustment lever (18) on the required
position.
Recommendations
Test
If the machine has not been used for a pro-
longed period, it is advisable for hygienic
reasons to run a rinse cycle through the ma-
chine.
Place a cup under the dispensing tube (7) and
operate the steam/hot water (9) knob. Fill a cup
with water.
Preheating cups
Cups may be preheated by placing them on the
heating plate.
Temperature led
When connecting the machine, the display
shows
WARMING UP
As soon as the operating temperature has been
reached, the display shows
SELECT PRODUCT
READY FOR USE
Empty coffee bean container
warning light
When this led is on, the cof-
COF. BEANS EMPTY
READY FOR USE
fee grinder stops. Fill the
container with coffee beans and restart the
cycle.
Empty water tank warning light
An empty water tank causes
WATERTANK EMPTY the cycle to stop automati-
cally. Fill the tank with water and restart the cycle.