Grundig GV 29 EURO Manuel De Service page 60

Drive Mechanism
8.2 Disassembling the Cassette Mechanism (Pos. 0090)
– Remove the cassette mechanism (Pos. 0090, see point 8.1).
– Press the lid opening lever (Pos. 040E, Fig. 8.3) to release the lock
and lower the tray (Pos. 040A, Fig. 5.1).
– Unhook the spring (Pos. 0700, Fig. 8.4).
– Move the cassette drive slide (Pos. 0600) fully backwards and
remove it from the right stand (Pos. 0200, Fig. 8.4).
– Subsequently, the door opener lever (Pos. 0500) can be removed
(Fig. 8.4).
Fig. 8.4
Door opener lever
0500
Notes on lubricating the cassette mechanism (Pos. 0090)
– Use only grease, part no. 75988 061 7800 for lubricating the cassette
mechanism.
– Follow the instructions given in Fig. 8.5 – Fig. 8.10!
Apply grease (part no. 75988 061 7800)
at the inner surface.
0100 Stand, l
Fig. 8.5
0100 Stand, l
Fig. 8.6
5 - 22
Stand r
0200
Cassette drive slide
0600
Spring 0700
Apply grease
(part no. 75988 061 7800)
to the side
0200 Stand, r
Apply grease
(part no. 75988 061 7800)
to the inner surface.
Apply grease (part no. 75988 061 7800) to
the part in contact with the cassette drive slide
Fig. 8.7
Apply grease
(part no. 75988 061 7800)
to the groove
Apply grease
(part no. 75988 061 7800)
0200 Stand, r
Fig. 8.8
0600 Drive slide
Apply grease (part no. 75988 061 7800)
Fig. 8.9
Apply grease (part no. 75988 061 7800)
Fig. 8.10
GV 29 EURO, GV 9300 EURO
Apply grease (part no.
75988 061 7800) to the side
Apply grease
(part no. 75988 061 7800)
to the inner surface
Apply grease
(part no. 75988 061 7800)
to the side
0500 Door opener lever
GRUNDIG Service