Grundig GV 29 EURO Manuel De Service page 14

CONNECTING AND PREPARATION
L
R
AV1 AV2
3
4
AC IN
2
Connecting the aerial, TV set and mains cable
1 Connect the aerial cable from the domestic aerial with the aerial socket
» « of the video recorder.
Ä Ä
EURO-AV1
DECODER/ EURO-AV2
TV 2
Connect the aerial cable supplied with the »Ö« socket of the video recorder
and the aerial socket of the TV set.
3 If the TV set is equipped with one or several EURO-AV sockets:
connect the » X EURO-AV
EURO-AV1
socket of the TV set using a commercially available EURO-AV cable.
DECODER/ EURO-AV2
TV
– The advantage of this connection is a better picture and sound quality
during playback.
4
Connect the mains cable supplied with the
recorder.
Connect the mains cable with the mains supply socket.
– The video recorder is now in standby.
AC IN
Attention:
The video recorder is isolated from the mains only when the mains cable is
disconnected from the mains supply socket.
________
TV R
1
EURO-AV1
DECODER/ EURO-AV2
TV
1« socket of the video recorder with the AV 1
~
»AC IN « socket of the video
SETTINGS
____________________________________________________________________________
Adjusting the TV set to the video recorder
This adjustment is not necessary if the video recorder and the TV set are
connected with a EURO-AV cable.
Preparation
Switch the TV set on.
On the TV set, select the »AV« programme position for video playback via the
aerial socket.
Consult also the user manual of your TV set.
Adjustment
1 Switch the video recorder on using the » D D
2 Press the » DUB « button for about 3 seconds.
– » 2 1 R F «, for example, is displayed on the video recorder (21 is the output
channel of the video recorder).
The video recorder now emits a test pattern.
3 Search the test pattern on the TV set in the UHF range on a channel between
21 and 69 (channel 21 in the example).
4 Store the setting on the TV set.
5 Press the » DUB« button to end the setting.
Improving the picture quality
If the quality of the "recorder picture" is poor, or the picture quality of one or
more TV programmes on the TV set gets worse, you must search a different "free"
channel on the TV set.
1 Switch the video recorder on using the » D D
2 Press the » DUB « button for about 3 seconds.
– » 2 1 R F «, for example, is displayed on the video recorder (21 is the output
channel of the video recorder).
The video recorder now emits a test pattern.
3 On the TV set in the UHF range between channel 21 and channel 69, search
for a "free" channel on which no TV programme is received (only snow and
sound noise).
4 Use the » * Ü * Ü « buttons on the video recorder to change the output channel
of the video recorder until the test pattern appears on the picture screen of the
TV set.
Press the »OK« button to store the setting.
5 Store the channel on the TV set.
6
Press the » DUB« button to end the setting.
« button.
« button.