Publicité
Les langues disponibles
Les langues disponibles
OBJ_BUCH-0000000254-001.book Page 18 Thursday, February 25, 2016 3:15 PM
en
18
Selecting the rotation direction
(figure 9).
Under no-load, the application tool rotates
counterclockwise; when applying pressure,
the rotation direction switches to clockwise,
and when pulling back, it switches to counter-
clockwise again.
To avoid accidental starting, e. g., during
transport, set the rotation selector switch to
the centre position.
Handling the battery.
Operate and charge the battery only within
the battery operating-temperature range of
0°C – 45°C (32°F –113°F). At the beginning
of the charging procedure, the battery tem-
perature must be within the battery operat-
ing-temperature range.
Battery charge-control indicator
(figure 10).
Press the button to activate the LED indica-
tion.
LED indi-
Meaning
cator
1 – 4
Percentage
green LED
of charge
condition
Continu-
Battery is
ous red
almost
light
empty
Red flash-
Battery is
ing light
not ready
for opera-
tion
The real percentage of the battery charge
condition is only indicated when the power
tool motor is stopped.
The electronics automatically switch off the
motor prior to the battery being deep dis-
charged.
Activity
Operation
Charge battery
Bring the battery
into the battery
operating-temper-
ature range, then
charge
Fig. 9
Rotational direction switch
Fig. 10
≤
100 %
≤
75 %
≤
50 %
≤
25 %
=
0 %
Publicité
