Fein AGWP10 Serie Mode D'emploi page 16

OBJ_BUCH-0000000254-001.book Page 16 Thursday, February 25, 2016 3:15 PM
en
16
Mounting a tap with the jaw chuck
Fig. 7
(figure 7).
Drive spindle
Degrease the output spindle and the inside
cone of the jaw chuck before mounting.
Slide the jaw chuck onto the drive spindle.
Jaw chuck
Open the clamping ring and loosen the lock in
1.
the jaw chuck using the Allen key.
Insert the tap.
Close the clamping ring and tighten the lock in
the jaw chuck using the Allen key.
2.
3.
4.
Tap Allen key
5.
6.