Operation; Operating Surface Burners; Operating Surface Burner During A Power Failure; Oven Light - Amana ARGS7650 Serie Mode D'emploi

Operation

Operating Surface Burners

WARNING
To avoid risk of serious personal injury, property
damage, or fire, do not leave burners unattended while
in operation. Grease and spillovers can ignite causing
a fire.
This range comes with one 5,000 BTU (L.P., 4,000 BTU)
burner for "true" simmering capabilities. One 9,100 BTU
(L.P., 8,000 BTU) burner and 2, 12,500 BTU
(L.P., 10,000 BTU) high output burners for fast, efficient
heating.
1. Push in and turn control knob counterclockwise to
"LITE" position.
2. After gas ignites, turn control to desired setting.
• Each control knob can be set to any required
cooking temperature. Burner settings do not have
distinct clicks.
• Use "HI" to bring food to boiling temperatures.
When food is boiling, temperature setting should
be reduced.
3. Turn control knob to "OFF" position when finished
cooking.
Operating Surface Burner during a Power
Failure
Although system that ignites burners is electric, surface
burners can be ignited during a power failure. Never
attempt to light bake or broil burners during power failure.
1. Hold match at base of desired burner.
2. Push in burner control knob and turn to "LITE"
position.
3. After gas ignites, remove match from burner and turn
burner control knob to desired setting.

Oven Light

• Used to light inside of oven.
• Brightens oven cavity when oven door is opened or
panel switch is turned on.
• Switch is located on left side of control panel.
17
OVEN LIGHT