Amana ARGS7650 Serie Mode D'emploi page 10

Converting Oven Burner for Use with LP/Propane
1. Remove storage drawer.
• See Removing Storage Drawer section.
2. Locate and remove 2 screws attaching Z-shaped
cover plate.
• Cover plate located in center, rear of storage drawer
cavity.
• Removing cover plate exposes oven burner orifice
and air shutter.
A—Air shutter screw
B—Orifice hood
C—Air shutter
3. Turn orifice hood clockwise until snug.
• Do not over tighten orifice hood. Orifice hood can
strip.
4. Replace cover plate and storage drawer.
Converting Broiler Burner for Use with LP/Propane
1. Locate orifice spud attached adjacent to pressure
regulator and remove for later use.
• Orifice spud used for LP/propane gas is silver and
is stamped "58".
Natural Gas—52
LP/Propane—58
2. Open oven door and locate broiler burner on oven
ceiling.
• Remove oven door to make conversion easier. See
"Removing Oven Door" section.
3. Remove 2 screws securing front of burner to oven
ceiling and remove broiler.
• Be careful not to damage ignitor while removing
broiler.
4. Unscrew natural gas burner spud stamped "52" with
5
/ inch socket wrench and replace with LP/propane
16
burner spud stamped "58".
• Attach unused burner spud near regulator for future
use.
5. Reinstall broiler and, if necessary, oven door.
10
Orifice Spud