Shift Cable Installation; Shift Cable Connection To Frame - Ultraflex B110B Manuel D'installation Et D'entretien

ULTRAFLEX

3.6 Shift cable installation

CAUTION
Before starting the installation, make sure the rocker arm is in neutral
position (horizontal) and the throttle in idle position (as shown in the
picture).
Identify on which side of the frame the shift cable will be installed
depending on whether the user needs a movement to pull or push the
cable.
3.6.1 Shift cable connection to the frame
Connect the end conduit fitting of the shift cable
1
to the frame by means of bracket (Q) and U-bracket
(P) by means of screws (T). then fasten the screws.
page 16
of 67 -
SINGLE LEVER CONTROL B110
Installation and maintenace manual
ROCKER ARM
FRAME
Q
P
T