Auto Answer - Leitronic AG bebetelEXTRA Mode D'emploi

9.3

Auto answer

Landline mode: If you want to change the number of rings prior to answer, you can proceed
as follows:
1. Set function switch to PROG.
2. Press .* n
3. Enter .9 .7 .1 .3 .4 .7 <n>
4. Press .* n
5. Enter .9 .7 .1 .3 .4 .7 <n>
6. Press .# n
7. If the number is entered correctly there will be one beep at the end of the input. Wrong
re-entering will provoke two beeps. Incorrect numbers will not be stored so the former
value remains active.
8. Set function switch to OFF.
<n>
Comment
®
2..9 bébétel answers call after
®
10 bébétel does not answer incoming calls
Note:
If you key a wrong number set function switch to OFF and repeat steps 1 to 7.
Default value is 2 rings.
(n see table below).
once again for confirmation.
n
rings
17