Installation; Setup Bluetooth-Connection (Pairing) - Leitronic AG bebetelEXTRA Mode D'emploi

4

Installation

3 x beep:
1
OK
-Line OK
Bluetooth not OK
1. Insert 9 V-battery into compartment on rear side of device.
2. Plug the AC-adaptor into mains socket and the cable of any optional accessory (Motion
detector 8.5 or bébételTWIN
3. Set up the telephone connection, either landline or Bluetooth:
Landline mode: Plug enclosed cord into
the country specific telephone adaptor
Bluetooth mode: Pair with mobile A
6.9 set mobile A to soundless.
4. Set function switch to PROG and enter telephone number to be dialed (phone B).
5. Set sensitivity switch to desired level (LOW/MED/HIGH)
6. Set function switch to ON
4.1

Setup Bluetooth-connection (Pairing)

Follow the steps below to pair bébételBLUETOOTH
your mobile phone instructions on how to connect a Bluetooth device in detail.
®
1. bébétel : Set function switch to PROG.
2. mobile A: Choose to add new Bluetooth-device.
Select „bebetel", mobile A prompts for passcode: enter PIN-Code: Factory setting 9797.
Notes:
Distance between mobile A and bébétel
mobile A: With some mobile phones (such as Nokia, Samsung), the connection has to be
manually produced and/or authorized: "Automatically connect" i.e. to enable bébétel
re-connect automatically.
Examples of setting up the Bluetooth connection
Check the Bluetooth-connection between bébétel
To change the bébétel
7.7
2
3
mobile A
®
8.4) into one of the
9
4.1. To avoid waking you child during dialling
®
bébétel is now in waiting period
®
should not exceed 3 m.
®
PIN 5.2.
8 EXT jacks.
-LINE jack and into the wall outlet using
8.2.
6.6.1.
®
with mobile A. Please take a look at
7.3.
®
and mobile A frequently
phone B
6.3 ready to use.
®
to
6.10.
5