Connection; Call Repetition/Call Acknowledgement - Leitronic AG bebetelEXTRA Mode D'emploi

6.7 Connection

During any telephone connection the indicator is permanently red.
You can change the mode using keys of your handset (i.e. mobile B, must be
compatible
).
Key bébétel
.0. Disconnection/Call acknowledgment
Switch between
.1.
Restart connection timer for two minutes and deactivate beeps
.3.
Deactivate the motion detector
.7.
Activate the motion detector
.9.
6.7.1 Time-out
There is a timer running during
for two minutes in case of a telephone call, and ten minutes in case of
before disconnection you will hear four beeps in your handset (i.e. mobile B). You can restart
timer by pressing .3.
6.7.2 Listening-in connection
Listening-in connection
The cause of the telephone call will be signalled with repeated beeps (every 5 seconds) as
follows:
Number Cause of telephone call
1 Activation by noise
2 Activation by motion detector (no motion at the moment)
3 Activation by motion detector (motion still going on)
4 Connection time-out
6.7.3 Voice connection
Voice connection
will be established automatically during test call or by pressing
listening-in connectio
telephone during
and you can communicate with your child.
Voice connection
Otherwise your child will be disturbed by a busy tone for a while.

6.8 Call repetition/Call acknowledgement

A call can be repeated until it is acknowledged by pressing
repetitions are programmed
Note:
If calls are repeatedly made to an answering machine additional costs can be incurred.
You can risk disturbing someone if you have programmed an incorrect telephone number.
®
bébétel calls you again, if your child continues to cry after the waiting period of two
minutes.
If you use the motion detector we recommend setting call repetitions because it is
possible that your child may cross the monitored section once only.
®
confirms with one beep
listening-in
and
listening-in
on your telephone.
will be established in case of a call due to noise or motion activity.
n. During this mode bébétel
must always be disconnected by pressing
9.2.
voice connection
voice connection
and
touch tone
mode. Connection is kept up
test call
. Ten seconds
.1.
®
loudspeaker is activated
.0. on your telephone.
.0. on your telephone. Call
on your
9