6.9 Remote dial-in
For peace of mind you can call bébétel
®
Call bébétel
over landline or mobile A. If bébétel
number identical to the programmed, you can listen to the room directly. Otherwise you will
hear a beep to advice you to enter the PIN-Code within 15 seconds. Entering correct PIN
code allows you to listen into the room
Note:
If recognition does not work, you may delete your contact in mobile A and try again.
Set mobile A to „silent", to avoid your child being woken up by incoming calls.
Calling number recognition works only in Bluetooth mode, however is not guaranteed to
work with every mobile phone type (mobile A) paired with bébétel
network.
Factory setting of PIN-Code is 9797. We recommend programming a personal PIN-Code
for safety reasons
In case you entered a wrong PIN-Code, bébétel
call again and enter correct PIN-code.
If the telephone you are using to dial (phone B) is not able to send
7.5 the remote access is not possible.
Turn-off remote dial-in
6.10
Test Bluetooth connection
1. Mobile A (in graphic
sign in the display of mobile A after Bluetooth connection is established => bébétel
(indicator is blue).
®
2. bébétel
: Set function switch to OFF.
There should be a change visible on the display of mobile A showing that Bluetooth is
disconnected. It may take a few seconds for this information to show in the display.
®
3. bébétel
: Set function switch to ON. bébétel
the colour of the indicator changes every second.
There should be a change in the display of mobile A, showing that Bluetooth is starting
to re-connect. This info may be delayed for a few seconds.
As soon as the indicator is permanently blue, the Bluetooth connection between
®
bébétel
and mobile A is established.
Check if the Bluetooth-connection is stable during Bluetooth mode or if bébétel
connect indicated by a changing LED colour every second (
not stable you must use landline mode or try another mobile A.
For more information please visit our web-site: www.bebetel.com/bluetooth.
10
®
from any telephone and listen to your child's room.
6.7.2.
5.2.
9.3.
4): Check, if there is a symbol i.e. head-set or another Bluetooth
®
recognizes the in-coming calling
®
will disconnect after sending two beep
®
changes to Bluetooth-search mode.
). If Bluetooth connection is
®
an in all GSM
touch tone commands
®
®
tries to re-