Human Touch SUPER NOVO Mode D'emploi Et D'entretien page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

take
control
SETTING THE UNDERFOOT ROLLER SPEED
You can set the underfoot roller speed to slow, medium, or fast. You can also turn the rollers off. This setting affects
both manual and auto massage programs.
1. From the main menu, select SETTINGS to display the SETTINGS menu, then scroll down to the second screen.
2. Select FOOT SPD, then select the desired speed. The default is SLOW.
TIP: When the status screen is displayed, use the navigation buttons to configure the FOOT SPD setting in
the upper left-hand corner.
Foot massage too soft? Remove the softening soles from underneath your feet.
Simply open the foot/calf massage well zippers, remove the softening soles from
the bottom of the massage wells, then close the zippers.
humantouch.com
Bottom of the
massage wells
Softening Soles
22
Your Super Novo calf massager has a lot of flexibility.
the calf massager from your knee to your lower calves, or set it to AUTO
GLIDE mode, which moves up and down automatically. You can also control
the underfoot roller speed.
KNEE
The Super Novo calf massager can move from your lower calves up to your knee (the default is the lower position).
You can also turn the AUTO GLIDE feature on to enable it to move up and down.
1. From the main menu, select SETTINGS to display the SETTINGS menu.
2. To move the calf massager up, press and hold UP.
3. To move the calf massager down, press and hold DOWN.
4. Select AUTO GLIDE ON to turn this feature on; select AUTO GLIDE OFF to turn it off.
You can manually adjust
23

Publicité

Table des Matières
loading

Table des Matières