Human Touch Perfect Chair PC-600 Mode D'emploi Et D'entretien page 15

take control
S
Using the Jade Heat system
Press the heat button to toggle through low, medium, high, and off. The Jade Stones radiate far-infrared
rays that deliver warmth into muscle tissue. Once the deep penetrating heat reaches the optimal
temperature, the desired level of warmth is maintained (Fig.37).
Fig.37
NOTE: The Jade Heat system automatically powers off after two hours of no use.
S P
Using the adjustable lumbar system
Press and hold the plus button to inflate the lumbar area; press and hold the minus button to deflate
it. The adjustable lumbar system requires four AA alkaline batteries (see page 18 for installation
instructions). Battery life depends on adjustment frequency, however with average use the batteries
should last many months (Fig.38).
Adjustable lumbar controls
Fig.38
NOTE: Supreme Upholstery Package control panel shown.
humantouch.com
Heat controls
Low
Medium High
26
Human Touch Safety Feature:
Battery Backup
Your Perfect Chair has a built-in battery backup system, to ensure that you can incline and exit the chair if
a power failure occurs. The battery backup system uses two common 9V batteries (not included). Be sure
to note the date you installed the batteries and the battery expiration date. Replace the batteries before the
expiration date, or at least annually, to ensure that the battery backup system is functional (Fig.39).
DATE:
IMPORTANT: To use the built-in battery backup system to incline and exit the chair during a power
failure, push the controller forward to automatically restore the chair to the upright position.
CAUTION:
The batteries can only be used ONCE; after using the battery
backup system, replace the batteries immediately.
Fig.39
27