Human Touch Perfect Chair PC-600 Mode D'emploi Et D'entretien page 11

S P
Install batteries in the lumbar system
1. Locate the zippered pocket on the back of the body pad in the left shoulder area (Fig.23).
2. Unzip the pocket and remove the foam square (Fig.24).
3. Lift the edge of the black battery compartment that is closest to the edge of the pad upward (do not pull
up on the edge of the box from which the wiring is visible). (Fig.25).
Zipper pocket
Fig.23
DO NOT lift here
Fig.25
humantouch.com
Removed foam square
Fig.24
Battery compartment
18
4. Use your fingers to remove the battery compartment cover, then install four AA alkaline batteries (Fig.26).
5. Replace the battery compartment cover.
6. Tuck the battery compartment back into the foam cavity.
7. Replace the foam square to cover the battery compartment.
8. Close the zippered pocket.
Fig.26
19