Dräger Alcotest 5000 Mode D'emploi page 24

Masquer les pouces Voir aussi pour Alcotest 5000:

Table des Matières

Damage to the instrument

If several tests are carried out in a short period of time, condensation can collect

inside the funnel which can then get into the instrument.

Replace the funnel in good time.

Reading measurement result

After a few seconds (depending on the concentration measured and the

temperature of the device), the test results are shown on the display and saved

to the instrument. Two different results are possible:

C) No alcohol has been found to be present. The test is passed. In addition to

that, the green LED lights up. After a few seconds, the instrument is ready to use

D) Alcohol has been found to be present. The test is not passed. In addition to

that, the red LED lights up. Press the

measurement.

During the sensor recovery time, the display shows a rotating progress

Repeat the process (See Page 23 Chapter "Carrying out automatic breath

Confirmation of the test results Alcohol and No Alcohol can be configured in

the menu as follows:

Confirm the test results by pressing the

The test results are confirmed automatically after 2 seconds.

button to continue with the next