Table des Matières
Publicité
en
Use
4.1.5
Switching instrument on and off
Switching on the instrument:
1.
Press the
2.
Wait until it shows it is ready to take a measurement.
Switch off the instrument:
1.
Press and hold the
The instrument will switch itself off 4 minutes after last being operated.
4.2
Initial start-up
When the instrument is switched on for the first time, a setup assistant appears.
This step is omitted for preconfigured instruments.
The following settings are made using the setup assistant:
Language
Date
Time format
Time
All settings can be changed later on using the menu.
NOTICE
Loss of default settings
If changing the battery takes more than 5 minutes, then the date and time need
to be reset.
22
button and hold for approx. 1 second.
button for approx. 3 seconds.
Publicité
Table des Matières
