Menu Operation - DeFelsko PosiTector GLS Mode D'emploi

To access the Menu, power-up the gage, then press the center
navigation button
used to navigate the menu. If desired, touch screen functionality
can be disabled within the Setup menu (See Touch, pg. 7).
Select a menu option by touching it, or use the
tons to highlight the desired option and press
On menus longer than one page, the current page number is dis-
played below the menu name. Navigate between pages using
when the first menu item is selected, or
menu item is selected. If using touch, navigate between pages
by touching
Press the
Select Exit to close the Menu.
When powered-up, the PosiTector automatically
determines which probe is attached and does a self-
check.
To disconnect a probe from a body, slide the plastic
probe connector horizontally (in the direction of the
arrow) away from the body. Reverse these steps to
attach a different probe. It is not necessary to power-
down the Gage when switching probes.

Menu Operation

. Either the keypad or touch screen can be
or , or by swiping up or down.
button or swipe right to return to a previous screen.
When a Menu option is highlighted, the
icon indicates on-gage help is available.
Press
help. A formatted PDF containing all on-
gage help items is available at
www.defelsko.com/help
NOTE:
have the latest on-gage help information.
indicates that a sub-menu exists for the
Menu option. Select the option to display its
sub-menu.
or touch the
Update your gage to ensure that you
Probes
2
and
to select it.
when the last
icon to display the
but-