Wall Mount Assembly; Information On Disposal - Thomas QUICK STICK Mode D'emploi

• Never attempt to repair damage
to the appliance, its accessories or
the power cord yourself. Always
have the appliance inspected and
repaired by an authorised custo-
mer service facility. Modifying the
appliance can pose a danger to
your health. Ensure that only genu-
ine THOMAS replacement parts
and accessories are used.
• Only use accessories and spare
parts approved by the manufac-
turer for this product. Any other
use constitutes improper use. Any
improper use is entirely at the
user's risk. The manufacturer takes
no responsibility for any resulting
damage.
• Other types of usage, conversions
or modifications are prohibited.
Charging the THOMAS quickstick/
battery charger
• The voltage specified on the nameplate of the
charger must match the mains supply voltage.
• Do not operate the battery charger under any
circumstances if:
• The charger plug is damaged,
• The charger is visibly damaged.
• Always unplug the charger from the wall socket:
• when the product is not charging
• if malfunctions occur while charging
• before attaching/removing accessories
• before cleaning or maintenance of the product.
• Do not switch the appliance on while it is char-
ging.
• Unplug the power cord from the socket after
charging the appliance.
• Store and use the charger only in dry rooms
with an ambient temperature between 5°C and
45°C.
• Never touch the charger with wet hands, sub-
merge in liquids or hold under running water.
You are risk of a life-threatening electric shock!
• Keep the charger away from direct sunlight,
naked flames or other heat-emitting sources.
There is a risk of fire or explosion!
• Only charge the appliance with the charger sup-
plied. Do not use any other battery chargers.
• Do not use the battery charger included in the
scope of delivery to charge any other products.
Danger of explosion, risk of injury and possible
product damage!
Use
Step-by-step instructions for use can be found on
pages 3 to 5.
① Assembly
② Vacuuming
③ Emptying the dust bin
④ Charging the battery
⑤ Cleaning the cyclone unit
⑥ Cleaning the hygiene filter
⑦ Cleaning the microfibre roller

⑧ Wall mount assembly

Wall mount assembly
Align the wall mount vertically to the wall and hold
it in place. Draw in the drill hole positions with a
pencil. The diameter of the drill holes should be
approximately 8 mm. Push the dowels provided
into the holes and attach the wall mount with the
screws provided.

Information on disposal

Packaging
The packaging protects the THOMAS quick-
stick from damage during transport. It is made of
environmentally friendly materials and is therefore
recyclable. Do not dispose of packaging that is no
longer required in household waste but put out for
recycling.
41