Cobra G100 Manuel Utilisateur Et Installation page 14

4 - FUNCTIONS LIST.
4.1 - Standard Functions list.
The following list indicates the main functional characteristics of the
alarm system.
• Arm / Disarm by means of dynamic - code radio controls.
• Volumetric protection of the vehicle's interior by ultrasonic sensor
not requiring sensitivity adjustment.
• Perimetric protection. When the alarm is armed, after 25 s the siren
will sound if a door or the bonnet or boot are opened.
• LED indicating the system's status with alarm - record memory
function.
• Safety circuit to prevent the system being armed when the the engine
is running.
• Disablement of the sensor transducer and / or external sensor.
• Emergency disarming by pin - code.
• Wire - cutting protection.
• Original centralised door and boot closing system.
• Open door / bonnet / boot signal.
• Armed / Disarmed blinker.
• Automatic system arming.
• Automatic engine cut - off activation.
• Engine cut - off alarm.
• Anti - diversion blocker.
• Anti - diverson alarm.
• Automatic anti - robbery protection.
• Voluntary anti - robbery protection.
• Anti - robbery engine lock controlled by movement sensor.
• Perimetrical input polarity selection procedure.
14
06DE2245D OK.pmd 14
4.2 - Radiocontrol button functions.
Button A This button arms the alarm and blocker
system, deactivates the volumentric
input and additional sensors input,
activates the panic option, gives
access to the programming function,
selects the line and raises the buzzer
volume in the programming table, and
activates the Car Finder option.
Button B Decreases buzzer volume, disarms the
alarm and the immobilizer, enables /
disables the function.
GB
USER AND FITTING INSTRUCTIONS
09/09/2008, 10.06
B
A
B
A
G100