Printing from the
Computer
Before starting to print
• Confirm that the printer and computer are connected
(page 6).
• Confirm that the paper roll and the ink ribbon are
correctly installed (page 11).
• Confirm that the paper tray is adjusted to suite the
paper to be used (page 10).
• Confirm that compatible ink ribbon and printing paper
are installed (page 29).
Note
Do not look into the paper output slot during printing.
The sharp edge of the printout may poke your eye or
face. This may cause loss of sight. Also, do not insert a
foreign object in the paper output slot. The cutter may be
damaged or broken and a piece of the cutter can cut you.
Printing
LCD
1
Turn on the printer and computer.
After a few seconds, the following message should
appear on the LCD. While READY is being
displayed on the LCD, the printer is ready to print.
Printing pack currently used
Displays the remaining amount of
paper or ink ribbon, whichever is less.
Identification of the printing pack currently
being used on the LCD
Display on the LCD
R153
R154
R155
R156
Notes
• Don't turn the printer on again within 5 seconds
• Do not turn the computer off and on again while
2
Send the image data from the computer to be
printed.
The printer starts printing.
For details, refer to the instructions for the printer
driver included on the CD-ROM disc supplied.
1 While the printer is receiving the image data,
1
2 The printer starts printing the transferred image
3 After printing is finished, the printed paper is
Printing pack
2UPC-R153/R153H
2UPC-R154/R154H
2UPC-R155/R155H
2UPC-R156/R156H
after turning it off.
it is accessing a hard or another disk.
the following message should appear.
data as soon as the print command is sent from
the computer.
The following message should appear.
Number of pages to be printed
The color indication changes as the color printing
procedes:
StarttYELLOWtMAGENTAtCYANtLAMIt
Finsih.
ejected from the output slot.
The printing time depends on the image size,
ink ribbon and the paper.
Printing from the Computer
19