1
Pull the lock lever for the front door toward you to
open the front door
2
Pull the lock lever for the ribbon base located on the
front of the ribbon base and pull up the ribbon base.
3
Pull the paper cartridge of the printer toward you.
Take out the packages in which the paper holders
are stored inside the printer.
Then, close the front door in the reverse operation.
4
Adjust the length of the blue paper holder.
There are two kinds of paper. One is paper with
127-mm (5-inch) width and the other is paper with
152-mm (6-inch) width.
The blue paper holder has been pre-adjusted for
paper with a 152-mm (6-inch) width.
Paper with 127-mm (5-inch) width: 2UPC-
R153/R153H and 2UPC-R155/R155H
Printing Pack
Shorten the length of the blue paper holder.
Loading the Paper Roll and Ink Ribbon
9