Usb Connection - PNI Hunting 350C Manuel D'utilisation

FHD
00:02:04 00:03:53 00:08:31 00:17:48 00:36:20 01:13:21

3.5 USB Connection

When camera is connected via USB cable; screen display "MSDC", press "Menu" once, "MSDC" turns
to "PC Cam", camera now can be used as a PC camera; press "Menu" again, camera exits PC camera
mode.
3.6 Attention
1. Insert the SD memory card correctly, camera does not support SD card hot swap (insertion).
2. Please use high-quality AA batteries in order to prevent battery cells from corrosion of leaked acid.
3. Use right adaptor (12V/2A) of this camera to supply power, and do not invert the electrode when put
in batteries.
4. In Test mode, camera will automatically power off in 3 mins if there is no keypad touching.
5. Don't interrupt power supply during system upgrade, please deliver it back to factory if the device
doesn't work after upgrading.
6. Do not frequently insert or pull out SD card and battery or plug in and out the adaptor when the
camera is on.
7. Do not have any floating objects, such as leaves, strings, or ribbons in the 3M motion detection zone
of cameras, to avoid mistaking photograph or videos.
8. Do not keep camera next to hot irrelevant objects, air conditioner exhaust vents, and light, etc. to
avoid mistaking photos or videos.
9. Camera is with a 100° FOV lens which means more flash is needed to get better night time images
than the average 52° FOV lens from market; that's why 58pcs 60° IR LEDs are used on this camera.
But ensure these 58pcs IR LEDs can give enough flash to back the wide angle lens up that high
qualified AA batteries must be applied accordingly to deliver enough amperage to power the illuminator
consistently in dark environments.
10. Programmed Date/Time can be saved in camera for 12 hours as long as camera was powered 1
hour above.
- 30 -