PNI Hunting 350C Manuel D'utilisation page 28

Note: 8-32GB SD card is recommended. Please insert it with correct direction as marked.
3. Mount the Antenna & Insert SIM card (for 3G Model Only)
1.3 How to Setup the Camera?
1. Power on the Camera
Switch to ON; camera is ready to work upon motion triggers (screen will not light up upon "ON"). You can
mount it out to work directly after this if default settings are preferred. Pls refer to page3 below for default
settings in red letters.
2. Configure Camera Settings
Switch to SETUP, screen will light up. Press M key, you will enter the menu to view & change settings.
Please press arrow keys for navigation and OK key to confirm settings.
Note: please switch to ON to enable the camera to work after you get preferred settings.
3. How to Connect the Camera to Network (for 3G Model Only)?
Different from none cellular models, the 3G model has a signal "Searching" process when you switch the
power key to SETUP.
If it comes with a signal bar and no other pop-up, it means the network is auto-matched and no manual
setup is needed. Fill in phones/emails in "Send to", you will be able to receive photos upon motion triggers.
If it comes with a pop-up "SIM Auto Match failed...", please go to "SIM Auto Match" under "3G", select
- 21 -