Camera Stops Taking Images Or Won't Take Images - PNI Hunting 350C Manuel D'utilisation

2. Try to set your camera up in an area where no heat resources are in the camera's field of view.
3. In some cases, set the camera near water will make the camera take images with no subject in
them. Try to aim the camera over ground.
4. Try to set camera on stable and immovable objects, i.e.: large trees.
5. At night, motion detector may detect beyond range of the IR illumination. Reduce distance
setting by adjusting sensor sensitivity.
6. Rising sun or sunset can trigger sensor. Camera must be reoriented.
7. If person/animal moves quickly, it may move out of the camera's field of view before photo is
taken. Move camera further back or redirect camera.
8. Remove any limbs which are right in front of the camera lens.

6.2 Camera Stops Taking Images or Won't Take Images

1. Please make sure that the SD card is not full. If the card is full, camera will stop taking images. Or
user can turn on Cycle Recording to avoid such problem.
2. Check batteries to make sure that alkaline, or NiMH AA batteries left power is enough for camera to
work.
3. Make sure that the camera power switch is in the "On" position and not in the "Off" or "Test" modes.
4. When 3G function is on, there will be around 1 minute interval for camera to send out photo before
camera shooting the next photo. Turn off the GPRS, camera can shoot photos continuously.
5. Please format the SD card with camera before using or when camera stops taking images.
6.3 Night Vision Flash Range Doesn't Meet Expectation
1. Please check to make sure that batteries are fully charged or left power is enough;
2. "Max Range" offers better IR flash range. Given IR flash range values are based on Max Range
setting; so please adjust Night Mode to Max Range for better night vision flash range;
3. High-quality 1.5V NiMH rechargeable AA batteries can also offer much better IR flash range; alkaline
batteries cannot deliver enough amperage to power the illuminator consistently at night;
4. To ensure accuracy and quality of night time image, please mount camera to dark environment
without any obvious light sources;
- 42 -