Duty Cycle; Section 3 - Installation; Typical Connections - Miller GPS-500 Mode D'emploi

2-3. Duty Cycle

3-1. Typical Connections

Welding
Power
Source
Common Work Circuit
OM-266 Page 10
SECTION 3 – INSTALLATION
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
This unit is rated at 100% duty cycle
allowing continuous operation at
rated load.
Y Exceeding duty cycle can
damage unit and void
warranty.
sb1.1 2/92 – Ref. SB-079 809-A
(10) MOG Units