Unlinked Rc - Boston Scientific SC-5250 Mode D'emploi

Unlinked rC

The RC and Stimulator must establish a one-to-one link in order to communicate.
This prevents a RC from accidentally communicating with an undesired Stimulator.
If your RC is not linked to your Stimulator (i.e., when you have a brand new RC), the
following screen will appear and will prompt you to link the RC to the Stimulator:
Select Yes
any Stimulators in the vicinity and display them on the screen.
Navigate to the desired Stimulator and select it. The RC and
Stimulator will synchronize. When the RC is ready to use, the
Home Screen will appear.
If you select No
CROP IN TIGHTER SO
display the System Settings screen.
SCREEN IS MORE LEGIBLE
to complete this link. The RC will search for
, the RC will not link to a Stimulator and will
TROUBLESHOOT
Freelink™ Remote Control Handbook, 90930929-10, Rev A
Page 61