Cleaning And Care; Technical Specifications - Sonnenkonig CUBY Mode D'emploi

3 Cleaning and care

• There are no parts inside the machine that require your attetion or servicing. Do not try
to open the outer case. By doing so you could damage the motor and heating element
and invalidate the warranty. If you have a problem with the heater, or if the power cord
gets damaged in any way, you MUST take the unit to a suitably qualified engineer or
electrcal repair centre.
• Before cleaning the machine,please make sure it is diconnected from the power supply,
and has cooled down completely.
• Never clean the machine with water and do not let it get wet under any circumstance.
• The outside case can be cleaned using a slightly damp, lint-free cloth (a small amount
of detergent can be used if required).
• To remove any dust particles, etc. from inside the front grill, or the rear air intakes, you
can use a regular vacuum cleaner.
• Always make sure the machine is completely dry before using.
• If you are not going to use the heater for a while, it is best to make sure it is clean and
dry and then store it inside a plastic bag in a cool and dry place.
• With proper care and attention, this heater will give you many years of good service
and economical heating.

4 Technical specifications

Heating power
Voltage / frequency
Thermostat
Dimensions H x W x D
Weight
750 / 1500 Watt
220–240 Volt / 50 Hz
Yes
18.8 x 17.7 x 18 cm
1.6 kg
33
GB