Cleaning, Care And Maintenance; Technical Details - Sonnenkonig CUBY Mode D'emploi

04 - CLEANING, CARE AND MAINTENANCE

Attention! The general safety conditions must be observed during maintenance and care. To
ensure trouble-free operation of the heater, the unit should be cleaned regularly.
The following procedure is recommended for this:
1. Switch off the heater.
2. Then unplug the power cord from the power outlet.
3. Remove the accumulated dust from the air intake using a cloth or vacuum cleaner.
4. Wipe the housing with a damp cloth. Never use gasoline, solvents or abrasive agents to clean the
plastic parts, as these can damage the plastic surface.
5. Plug the power cord into the power outlet.
6. Switch on the device.

05 - TECHNICAL DETAILS

Heating power
Voltage / Frequency
Thermostat
Dimensions
Weight
750 / 1500 W
220–240 Volt / 50 Hz
Yes
18 x 19 x 18 cm
1.6 kg
EN
29