Initial Operation; Wireless Remote Control - solamagic S2 2500 Instructions De Montage Et D'utilisation

Initial operation

Warning: Completely remove the transport protection on the reflector.
Make the connection to the power supply (Schuko/mains plug)

Wireless remote control

For the device to be operated, you need the SOLAMAGIC FUS6 wireless remote
control which can be purchased from your distributor.
Assign a key on the hand-held transmitter for heat regulation.
Key assignment:
Remote control:
11/2016
Keys 1-4: Wireless channel keys
Transmission frequency: 433.92 MHz
Battery: CR 2032, 3 volt
Range: approx. 20 m with an unimpeded path through air
24