solamagic S2 2500 Instructions De Montage Et D'utilisation page 26

Multiple
programming:
Safety
switch-off:
11/2016
It is possible to program radiant heaters on up to eight keys on
one or more hand-held transmitters (multi-control).
Connect the relevant heaters to the mains. As described un-
der „Initial programming", the key to be programmed is briefly
pressed (heating tube starts at low level) and confirmed through
repeated pressing (heating tube starts at low level). Program
the next key by pressing (heating tube starts again at low level)
and confirm (heating tube starts at low level). This process is re-
peated until all the desired buttons on all the desired hand-held
transmitters are programmed.
The multiple programming is ended by extended pressing of
a key on one hand-held transmitter (heating tube extinguishes
and restarts for 2 seconds).
The radiant heater always remains switched off after a power
outage.
26