solamagic S2 2500 Instructions De Montage Et D'utilisation page 22

1. Installing the T-bracket
• Install the S2 radiant heater using 2 T brackets at a separation of 400 mm while
observing the safety distances and safety instructions (see Appendix 2).
• Secure the T-bracket (1) with the silicone plate (2) below it on the fastening
surface with 2 screws each according to the following figure.
2
2. Installing adapter claws on the T-brackets
• Push the adapter claws (6) into both T-brackets (1) mounted on the fastening
surface. Insert the M8x20/5 mm AF screws (8) into the holes. Insert the washer
(9) and tighten the M8/13 mm AF nuts (10).
11/2016
15
1 9
8 6
10
22