Maintenance Contract; Frost Protection - Kärcher BD 50/50 C Bp Classic Mode D'emploi

Batteries
Please observe the following warning
notes when handling batteries:
Observe the directions on the
battery, in the instructions for
use and in the vehicle operating
instructions
Wear eye protection
Keep children away from acid
and batteries
Danger of explosion
Fire, sparks, naked flames and
smoking must be strictly avoid-
ed
Danger of chemical burns
First aid
Warning note
Disposal
Do not throw the battery into the
regular waste
DANGER
Risk of explosion. Do not place tools or
the like on the battery, i.e. on the termi-
nal poles and cell connectors.
Risk of injury. Ensure that wounds nev-
er come into contact with lead. Always
clean your hands after having worked
with batteries.
Recommended batteries
105 Ah - main- 6.654-
tenance-free 141.0
1)
76 Ah - mainte- 6.654-
nance-free 093.0
2)
80 Ah, - low 6.654-
maintenance 290.0
3)
* Minimum volume of the battery
charging room
** Minimum air flow between the battery
charging room and the surroundings
The device requires 2 batteries
Complete set (24 V/105 Ah) incl. con-
1)
necting cable, order no. 4.035-449.0
Complete set (24 V/76 Ah) incl. con-
2)
necting cable, order no. 4.035-447.0
Complete set (24 V/80 Ah) incl. con-
3)
necting cable, order no. 4.035-990.0
10
Insert batteries and connect
 Drain off dirt water.
 Lift up the waste water tank and put
it aside.
 Pull out the battery plug.
Battery 6.654-141.0
1 Spacer
Battery 6.654-093.0
1 Spacer
Battery 6.654-290.0
1 Spacer
 Insert the battery into the device as
shown above.
 Insert the spacer between the bat-
tery and the device on the side indi-
cated in the illustration.
2,64 1,06
CAUTION
1,82 0,73
When the batteries are installed and
removed, the stability of the appliance
can be compromised; ensure a safe
6,60 2,64
stance.
 Connect pole using the enclosed
connecting cable.
 Connect the connection cable to
the free battery poles (+) and (-).
ATTENTION
If the polarity is reversed (positive and
negative terminals), the control elec-
tronics are destroyed.
Pay attention to correct poles.
 Place the waste water tank on the
appliance.
8
-
EN
Note:
Charge the batteries before commis-
sioning the appliance.
See also "Charging the batteries".
Removing the batteries
 Set the programme selector switch
to "OFF".
 Pull out the battery plug.
 Lift up the waste water tank and put
it aside.
 Clamp off the minus pole of the bat-
tery.
 Clamp off the remaining cables
from the battery.
 Remove the support blocks or the
foam pieces.
CAUTION
When the batteries are installed and
removed, the stability of the appliance
can be compromised; ensure a safe
stance.
 Remove the batteries.
 Dispose of the used batteries ac-
cording to the local provisions.

Maintenance contract

To ensure a reliable operation of the
appliance maintenance contracts can
be concluded with the competent
Kärcher sales office.

Frost protection

In case of danger of frost:
 Empty the fresh and waste water
tank.
 Store the appliance in a frost-pro-
tected room.