Controls & Displays; Front Panel - Marantz DV4001 Mode D'emploi

Controls & Displays

Front panel

1
DVD PLAYER DV4001
STANDBY
POWER
ON/STANDBY
9
1 STANDBY indicator
• Lights when the unit is in standby.
2 Disc tray
• Place the disc here.
3 AUDIO EX
• Lights when the AUDIO EX is activated using the
AUDIO EX button on the remote control.
• The sound quality of analog audio output is
improved by turning off analog video signal
output and the front panel display.
• It is applied to CDDA, Super Audio CD (CD
Layer) and DTS CD in Play mode.
4 HDMI
• The HDMI on/off state toggles when pressed
for three seconds or more. When on, the HDMI
indicator is lit.
• Pressing this button while HDMI is
enabled displays the current resolution.
Pressing this button again while the
resolution is dis played allows you to select
the resolution in the se quence below:
480p 576p 720p
5 HDMI indicator
• When the connected device is HDMI/DVI
compatible, the light fl ashes red.
2
0
1080i 480p
5
3 4
PLAY
AUDIO EX. HDMI
OPEN/CLOSE
-
3 (PLAY)
6
• Begins playing the disc play.
7 (STOP)
7
• Stops playing the disc play.
8 (PAUSE)
8
• Pauses playing the disc play.
9 POWER ON/STANDBY
• Press to turn the power on, and press it again to
enter STANDBY mode.
10 Display
• Operation indications are displayed here.
1 1 0 (OPEN/CLOSE)
• Press to open and close the disc tray.
12 4 / 1
• Press to skip reverse title, chapter, or track. You
can also press and hold this button to scan the
above.
13 ¡ / ¢
• Press to skip forward title, chapter, or track. You
can also press and hold this button to scan the
above.
6 7 8
STOP PAUSE
= ~
3
13